일반촬영분야에서의 3D 프린터로 제작한 텅스텐 혼합 필라멘트 차폐체의 성능평가

• 영문명: Evaluation of Tungsten Blended Filament Shields Made by 3D Printer in Radiography
• 발행기관: 대한방사선과학회(구 대한방사선기술학회)
• 저자명: 윤준(Joon Yoon) 윤명성(Myenog-Seong Yoon)
• 간행물 정보: 『방사선기술과학』방사선기술과학 제44권 제6호, 615~621쪽, 전체 7쪽
• 주제분류: 의약학 > 방사선과학
• 파일형태: PDF
• 발행일자: 2021.12.30

영문 초록

In the medical field, radiation provides information for the diagnosis and treatment of diseases. As the use of radiation increases and the risk of exposure increases, interest in radiation protection is also rapidly increasing. Lead shielding material is mainly used, which has a risk of lead poisoning and absorption into the body. Tungsten mixed filament shielding sheets were fabricated with a size of 70 × 70 mm and a thickness of 1, 2, and 4 mm by using a 3D printer. In the general shooting experiment, the thickness of the shielding sheet is 1 ∼ 5mm, the tube voltage is 60, 80, 100, 120 kVp and the tube current is 20, 40 mAs. In general photography, Tungsten showed better shielding rate compared to Brass, Copper, and Lead protective tools under all irradiation conditions, and in particular, Tungsten 5 mm showed 100% shielding rate. The 3D-printed tungsten mixed filament shielding is expected to be used as a new shield that can replace the existing lead protection tools as it shows a better shielding rate than the existing lead protection tools in Radiography.

목차

Ⅰ. 서론

Ⅱ. 대상 및 방법

Ⅲ. 결과

Ⅳ. 고찰

Ⅴ. 결론

키워드

3D 프린터 차폐체 텅스텐 일반촬영 방사선 3D printer Shielding sheet Tungsten X-ray Radiation