본문 바로가기

추천 검색어

실시간 인기 검색어

학술논문

복사열전달 수치해석을 통한 지표화 방화선 구축 폭산정에 관한 연구

이용수 0

영문명
Study on Mathematical Method of Radiation Heat Transfer for Estimating Width of Firebreak in Surface Fire
발행기관
한국방재학회
저자명
김동현(Kim, Donghyun)
간행물 정보
『2. 한국방재학회 논문집』 10권6호, 59~64쪽, 전체 6쪽
주제분류
공학 > 기타공학
파일형태
PDF
발행일자
2010.12.30
4,000

구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

1:1 문의
논문 표지

국문 초록

산불 지표화의 방화선 구축작업은 낙엽 및 관목류 등 지표 연료층을 제거함으로써 화염전파를 차단하는 대표적인 간접진화방법이다. 화재역학적인 의미의 방화선 구축은 화염으로부터 방출되는 열전달에너지에 미연소 연료가 착화되지 않도록 열전달 차단 구간을 설정하는 작업이다. 본 연구에서는 소나무 낙엽층에 대해 복사열전달 점열원 모델을 이용하여 풍속, 경사별로 지표화 화염을 방지할 수 있는 방화선 구축 폭 산정 방법을 제시하였고 평가를 실시하였다. 방화선 구축 폭은 소나무 낙엽 착화 임계복사열유속인 4.9 kW/m2가 미치는 거리를 기준으로 평가하였다. 그 결과, 풍속 0~5 m/s, 경사 0~50o 조건에서의 방화선 구축폭은 평균 화염 기준의 경우, 0.35~0.65 m, 최대 화염높이 기준의 경우, 0.75~1.05m로 산정되었다. 따라서 안전율을 고려한 적정 방화선 구축 폭은 최대 화염 높이를 적용한 1.05 m가 적합할 것으로 판단되며 향후, 실험 및 현장사례조사를 통하여 지표층 연료별 적정 방화선 구축 폭에 대한 비교분석 연구가 추가적으로 필요할 것으로 판단된다.

영문 초록

Building a firebreak against surface forest fire is a typical indirect suppression method that stops spread of flame by removing surface fuel, such as fallen leaves and bushes. In the sense of fire dynamic, building a firebreak is to set a section which will block thermal energy from igniting on virgin fuel. This study suggests and evaluates a calculation method for width of firebreak against surface fire for variant wind and slope conditions by applying the Point Source Model (PSM) to fallen leaves of Pinus densiflora. Width of firebreak was measured based on the distance the threshold radiant heat igniting Pinus densiflora fallen leaves at the heat flux of 4.9 kW/m2 reaches. As a result, at the wind velocity of 0~5 m/s and on the slope of 0~50o, the appropriate width of a firebreak was 0.35~0.65 m for the mean flame height and 0.75~1.05 m for the maximum flame height. Accordingly, considering the factor of safety, the most appropriate width of a firebreak is 1.05 m based on the maximum flame height. Additional comparative analyses through experiments and field surveys are deemed necessary to determine appropriate widths of firebreak for different types of surface fuel.

목차

1. 서 론
2. 본 론
3. 방 법
4. 결 과
5. 결 론
참고문헌

키워드

해당간행물 수록 논문

참고문헌

교보eBook 첫 방문을 환영 합니다!

신규가입 혜택 지급이 완료 되었습니다.

바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!

교보e캐시 1,000원
TOP
인용하기
APA

김동현(Kim, Donghyun). (2010).복사열전달 수치해석을 통한 지표화 방화선 구축 폭산정에 관한 연구. 2. 한국방재학회 논문집, 10 (6), 59-64

MLA

김동현(Kim, Donghyun). "복사열전달 수치해석을 통한 지표화 방화선 구축 폭산정에 관한 연구." 2. 한국방재학회 논문집, 10.6(2010): 59-64

결제완료
e캐시 원 결제 계속 하시겠습니까?
교보 e캐시 간편 결제