학술논문
Dosimetry Check™를 이용한 MVCT 선량계산 모델 구축에 관한 연구
이용수 2
- 영문명
- A Study on the Construction of MVCT Dose Calculation Model by Using Dosimetry Check™
- 발행기관
- 대한방사선과학회(구 대한방사선기술학회)
- 저자명
- 엄기천(Ki-Cheon Um) 김창환(Chang-Hwan Kim) 전수동(Soo-Dong Jeon) 백금문(Geum-Mun Back)
- 간행물 정보
- 『방사선기술과학』방사선기술과학 제43권 제6호, 431~441쪽, 전체 11쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2020.12.31
4,120원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of this study was to construct a model of MVCT(Megavoltage Computed Tomography) dose calculation by using Dosimetry Check™, a program that radiation treatment dose verification, and establish a protocol that can be accumulated to the radiation treatment dose distribution. We acquired sinogram of MVCT after air scan in Fine, Normal, Coarse mode. Dosimetry Check™(DC) program can analyze only DICOM(Digital Imaging Communications in Medicine) format, however acquired sinogram is dat format. Thus, we made MVCT RC-DICOM format by using acquired sinogram. In addition, we made MVCT RP-DICOM by using principle of generating MLC(Multi-leaf Collimator) control points at half location of pitch in treatment RP-DICOM. The MVCT imaging dose in fine mode was measured by using ionization chamber, and normalized to the MVCT dose calculation model, the MVCT imaging dose of Normal, Coarse mode was calculated by using DC program. As a results, 2.08 cGy was measured by using ionization chamber in Fine mode and normalized based on the measured dose in DC program. After normalization, the result of MVCT dose calculation in Normal, Coarse mode, each mode was calculated 0.957, 0.621 cGy. Finally, the dose resulting from the process for acquisition of MVCT can be accumulated to the treatment dose distribution for dose evaluation. It is believed that this could be contribute clinically to a more realistic dose evaluation. From now on, it is considered that it will be able to provide more accurate and realistic dose information in radiation therapy planning evaluation by using Tomotherapy.
목차
Ⅰ. 서 론
Ⅱ. 대상 및 방법
Ⅲ. 결 과
Ⅳ. 고 찰
Ⅴ. 결 론
REFERENCES
키워드
해당간행물 수록 논문
- 확산텐서영상 팬텀 제작을 위한 식물섬유 재료의 특성에 관한 연구
- 방사선전공 학생들을 대상으로 면대면 & 비대면 수업에 관한 설문조사 연구
- 폐경 여성에서 트리기반 머신러닝 모델로부터 골다공증 예측
- Dosimetry Check™를 이용한 MVCT 선량계산 모델 구축에 관한 연구
- 적층 제조형 방식의 3D 프린터로 제작한 뇌 팬텀의 유용성
- 근접방사선치료 시 몬테카를로 전산모사를 이용한 인체전산팬텀의 우측 폐와 주변 장기 선량평가
- 핵의학 감마카메라 정도관리의 딥러닝 적용
- 중성자선과 감마선 동시측정이 가능한 휴대용 계측시스템 개발에 관한 연구
- 방사선과 학생을 위한 가상현실 교육콘텐츠 개발 및 적용을 통한 학습효과 분석
- 보형물 삽입 유방의 압박 두께에 따른 유방 선량 평가
- Law법 수직입사를 위한 보조기구의 3D 프린터 제작 연구
- 머신러닝 기반 신체 계측정보를 이용한 CT 피폭선량 예측모델 비교
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 초음파 조직검사에 사용되는 Biopsy Gun Needle의 재질에 따른 반사율 연구
- 방사선에 대한 지식 및 인식도 연구
- 입원환자 일반촬영 이용량 및 피폭선량: 2018년 입원환자데이터
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!