학술논문
Produced Body Customized 3D Print Finger Brace using Dicom File
이용수 16
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 최현우(Hyeun-Woo Choi) 박지은(Ji-Eun Park) 김정훈(Jung-Hun Kim) 서안나(An-Na Seo) 이종민(Jong-Min Lee)
- 간행물 정보
- 『한국방사선학회 논문지』 제13권 제4호, 597~603쪽, 전체 7쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2019.08.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
임상에서 사용하는 진단 검사 장치인 전산화 단층촬영기(CT)를 이용하여 Dicom 파일을 획득하였습니다.
Dicom 파일과 3D 프로그램, 3D 프린터로 손가락 보조기(Finger brace)를 제작하였습니다. 손가락 보조기(Finger brace)는 인체를 대상으로 하기 때문에 형태의 정밀도가 매우 중요합니다. 3D Print는 정밀도가 우수하고, 재료가 다양하고, 출력 시간이 짧은 이점이 있습니다. 임상에서는 알루미늄 보호대나 의료기 업체의 손가락 보호대가 한정적입니다. 3D 프린터로 손가락 보조기(Finger brace)를 제작하면, 환자의 손가락 외상, 질병, 변형의 치료에 이용할 수 있는 정밀한 형태의 맞춤형 손가락 보조기(Finger brace)를 환자에게 적용할 수 있을 것이라고 기대합니다.
영문 초록
We obtained a Dicom file using a CT (Computed Tomography), a diagnostic test device used in clinical
practice. Dicom files and 3D programs, and finger printers with 3D printers. Because the finger brace is intended
for the human body, the accuracy of the shape is very important. 3D Print has the advantage of high precision,
variety of materials, and short output time. In clinic, aluminum protector or medical device manufacturer s finger
protector is limited. By creating a finger brace with a 3D printer, we expect to be able to apply a precise form
of a custom finger brace to the patient that can be used to treat a patient s finger trauma, illness, or deformity.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ.RESULT
Ⅳ. DISCUSSION
해당간행물 수록 논문
- Reduction of Artifacts in Magnetic Resonance Imaging with Diamagnetic Substance
- 3D Fusion Imaging based on Spectral Computed Tomography Using K-edge Images
- Comparison of Practical Usefulness of Respirational Radiation Treatment Using Geant 4 Simulation Code
- Feasibility Study of Non Local Means Noise Reduction Algorithm with Improved Time Resolution in Light Microscopic Image
- Prediction of Entrance Surface Dose in Chest Digital Radiography
- Utility Evaluation of Supportive Devices for Interventional Lower Extremity Angiography
- Evaluating the Effects of Inferiority Management Using a Group Counseling Program for University Students in Health Science
- Produced Body Customized 3D Print Finger Brace using Dicom File
- The Study on Interpretation of the Scatter Degradation Factor using an additional Filter in a Medical Imaging System
- The Study of Radiation Exposed dose According to I Radiation Isotope Therapy
- A Study on the Change of Image Quality According to the Change of Tube Voltage in Computed Tomography Pediatric Chest Examination
- Study on the Development of an Outdoor Radiographic Test Shield Using 3D Printer Filament Materials
- Evaluation of Stage of Liver Fibrosis by Ultrasonography : Based on Pathologic Results of Biopsy
- Image Compression by Linear and Nonlinear Transformation of Computed Tomography
- Comparison of X-ray Image Quality Between Multi-Function Device(MFD) and Weight Bearing Platforms(WBPs)
- Psychological Systematic Consideration of Breast Cancer Radiotherapy
- The Study for the Relation between Fatty Liver Diagnosed by Abdominal Ultrasonography and Hyperlipidemia
- Determination of Effective Energy of CT X-ray beams
- Analysis of the Entrance Surface Dose (ESD) and Contrast Usage of Trance Femoral Cerebral Angiography (TFCA) and Cerebral Computed Tomographic Angiography (CCTA) for Cerebrovascular Disease Examining
- The Measurement of Spatial Dose Rate by Gravity Ventilation after Technegas Scanning
- Design of Gamma Camera with Diverging Collimator for Spatial Resolution Improvement
- Luminescence Properties of Europium-doped NaSr(PO3)3 Phosphor
- Consideration of Cut-off Value for Fibrosis Serum Marker by Liver Fibrosis Stage in Chronic Hepatitis C Patients
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!