학술논문
Assessing the Flow Reduction of Low Impact Development Controls in a Residential Setting
이용수 0
- 영문명
- Assessing the Flow Reduction of Low Impact Development Controls in a Residential Setting
- 발행기관
- 적정기술학회
- 저자명
- Sergi Garbanzos Marla Maniquiz-Redillas
- 간행물 정보
- 『적정기술학회지』Vol.8 No.3, 144~152쪽, 전체 9쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2022.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The widespread development in recent years has resulted in the expansion of impervious surfaces, allowing runoff to accumulate and cause flooding issues. To reduce the impacts of runoff accumulation, the concept of low impact development (LID) has been adopted to restore the hydrological balance of urbanized areas. The objective of this study was to assess the flow reduction of the LID combinations in a residential park in Cavite, Philippines using Stormwater Management Model (SWMM). The 90th percentile of historical rainfall from the years 1975-2019 was used in the assessment. The bioretention (BR), infiltration trench (IT), and permeable pavement (PP) LID controls, which captured 43%, 42%, and 14% of the park area respectively, were selected for implementation alongside their different combinations. Results of this study have shown that most LID scenarios reached their maximum reduction capability once it takes up around 20-40% of the total available area. The highest reduction, at around 90%, was attained by the BR+IT+PP scenario. The use of the PP scenario, however, only yielded a 20% flow reduction due to its small capture area. Implementing LID controls in urbanized locations can help in reducing runoff buildup, thereby alleviating the potential impacts of flooding.
목차
Introduction
Materials and Methods
Results and Discussion
Conclusion
Acknowledgements
References
해당간행물 수록 논문
- An Appropriate Technology Approach for Utilizing Plastic Waste Derived Cooking Fuel to Reduce Indoor Air Pollution from Solid Fuel Cooking
- 사이니지를 활용한 제조업 작업환경 개선
- Open-source Software for Developing Appropriate Smart Manufacturing Technology for Small and Medium-sized Enterprises (SMEs)
- 에티오피아 신종감염병 대응 비대면 호흡기 검체채취시스템 역량강화
- 케냐의 지속가능한 모자보건 증진을 위한 감염병 퇴치 도전과 성과
- 적정기술학회지 Vol.8 No.3 목차
- 유한요소해석을 이용한 충격흡수용 마찰 스프링 성능변화 연구
- A Scalable Smart Greenhouse Design For Mongolian Families
- Assessing the Flow Reduction of Low Impact Development Controls in a Residential Setting
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!