학술논문
방사선사의 직무 스트레스 측정도구 개발을 위한 요인별 신뢰도 분석
이용수 6
- 영문명
- An Analysis of Reliability by Factors for Development of Job Stress Measurement Tools of Radiological Technologists
- 발행기관
- 한국환경보건학회
- 저자명
- 정홍량(Hong-Ryang Jung) 손부순(Bu-Soon Son) 임청량(Cheong-Hwan Lim)
- 간행물 정보
- 『1. 한국환경보건학회지』제32권 제2호, 103~110쪽, 전체 8쪽
- 주제분류
- 공학 > 환경공학
- 파일형태
- 발행일자
- 2006.04.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The present study is designed to analyze reliability and validity of the instruments used to measure job stress of radiologicaltechnologists mainly by means of the questionnaires from Korean edition of NIOSH check list. The subjectsof this study are 890 radiological technologists active at 44 general hospitals in 16 provinces and cities across the country.The item-total reliability revealed that 10 factors in 6 are the major causes of stress in job life of radiological technologists.The measuring instrument proved to be valid with reliability coefficient of internal consistency by factorsbeing more than 0.7. The factors found to be applicable herewith include limit and authority of job (0.73), cohesionwithin departments (0.86), resources control (0.81), mental requirements (0.85), job load (0.82), and job stability (0.72).When job autonorny item of causes are modified for proper use to radiological technologists, the measuring instrumentsare expected to show high reliability. It seems, however, necessary to develop a measuring instrument to analyze anduse the validity of related measuring instruments since the reliability here was rated low, with statistical coefficientslower than 0.7 in such factors as job management (0.57), conflicts within departments (.1.13), sense of responsibilityfor patients (0.66) and usage of education (0.26). As this study was intended to examine reliability and validity of theconcepts related to measurement of job stress on the part of radiological technologists, it may not be proper to applythe results of this study to general use, but is advised to utilize them as basis for developing instruments to verify reliabilityand validity by comparing with and analyzing other measuring instruments
목차
Ⅰ. 서론
Ⅱ. 연구대상 및 방법
Ⅲ. 연구결과
Ⅳ. 고찰
Ⅴ. 결론
해당간행물 수록 논문
- 반응조 형태 및 슬러지층 유동화 특성에 따른 Upflow AnaerobicSludge Blanket (UASB) 반응조의 운전효율
- 방사선사의 직무 스트레스 측정도구 개발을 위한 요인별 신뢰도 분석
- 콩 추출물의 구강미생물에 대한 항균효과
- 안성 지역 소나무 잎과 토양 중 PBDEs의 농도 수준 및 특성
- 아파트단지에서 아파트 층별 및 배치구조에 따른 도로교통소음 평가
- 국내 일부학교 건축물의 실내공기질 평가
- 서부경남 재래시장을 대상으로한 유전자 재조합 대두의 모니터링
- 기후대별 환경적응체질의 발생과 특성
- 에틸렌옥사이드에 폭로된 흰쥐의 혈액에 형성된 헤모글로빈 부가체에 대한 연구
- 수영장 욕조수의 소독방법에 따른 THMs 발생 특성
- 환기가 불량한 실내공간에서 담배연기에 의한 CO, CO2, TVOC 및 에어로졸의 변화
- 한약재 복용으로 인한 금속 섭취량 추정 및 위해성 평가 연구
참고문헌
관련논문
공학 > 환경공학분야 BEST
더보기공학 > 환경공학분야 NEW
- 도심환경교통(Urban Air Mobility, UAM) 도입에 따른 소음 문제에 대한 시론 -UAM 소음의 특성과 잠재적 건강영향: 연구 방향 및 관리를 위한 정책적 고려사항-
- 광주지역 공공수역의 미생물 군집 다양성 및 항생제 내성에 관한 연구
- 서울시 관악구 도림천 복개 정도에 따른 환경 악취 요인 분석
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!