학술논문
Analysis at Effects of Task Skills on Osteoporosis Tests
이용수 27
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 김현진(Hyeon-Jin Kim) 김원태(Won-Tae Kim)
- 간행물 정보
- 『한국방사선학회 논문지』 제14권 제1호, 31~37쪽, 전체 7쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2020.02.29
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
본 연구에서는 이중에너지 방사선 흡수계측법을 이용한 골다공증 검사 시 검사자의 숙련도에 따라 발생되는 부정확한 검사결과의 종류와 빈도를 확인하고 자주 발생하는 오류에 관해서는 교육을 통하여 개선이 가능하도록 하고자 연구를 진행하였다. 분석결과 주로 고관절 검사에서 잘못된 환자자세로 검사하거나 압박골절이나 퇴행성 변화가 있는 부위는 결과에서 배제하여야 하지만 압박골절 및 퇴행성 변화의 소견이 보이는 경우에도 결과에 포함된 경우가 많이 관찰되었으며 수술기구 등도 결과 값에서 배제하여야 하지만 포함되어 분석되어진 경우가 많은 것으로 확인되었다. 오류의 내용 중 가장 많은 부분을 차지하는 것은 환자자세의 오류로 모두 56건(척추 6건, 고관절 50건)이었으며, 다음으로 분석과정의 오류 37건(척추 35건 고관절 2건), 관심영역 오류 33건(척추 28건, 고관절 5건)의 순으로 나타났으며 품질관리의 미비로 인한 오류는 발생하지 않았다.
영문 초록
This study was conducted to examine the kinds and the frequency of incorrect outcomes occurring depending examiners skills, in testing osteoporosis by using Dual Energy X-ray Absorptiometry(DXA) and improve frequently occurring errors by educating them. The results of an analysis show that the outcomes from the test of hips in patients with wrong postures or some regions with pressure fracture and degenerative changes were often included, even though they should be excluded, and that surgical instruments were also included in the analysis, though they should be excluded from resulting values. Of them, the errors most often found were those about patients postures (n=56, 6 cases for spines and 50 cases for hips), followed by those about analytical processes (n=37, 35 cases for spines and 2 cases for hips), and then those about regions of interest (n=33, 28 cases for spines and 5 cases for hips). There were, however, no errors caused by the defectiveness of quality control.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Reference
해당간행물 수록 논문
- Quantitative Analysis of 3D-CRT Radiotherapy Planning Factors with or without IR in Patients with High Density Artifacts
- Evaluation of Classification and Accuracy in Chest X-ray Images using Deep Learning with Convolution Neural Network
- Educational Effects of Self-directed Learning Method Using 3D Printing Products on Radiological Science Students
- Improvement of Genetic Algorithm for Evaluating X-ray Reflectivity on Multilayer Mirror
- Evaluation of Temperature and Humidity of a Thermo-Hygrostat of PET/CT Equipment using a Temperature and Humidity Sensor(BME 280)
- The Correlation Study of the Occurrence of Blooming Artifact according to Dilution Ratio of Contrast Media in CT Angiography
- Evaluation of Roadmap Image Quality by Parameter Change in Angiography
- Study on the Applicability of Semiconductor Compounds for Dose Measurement in Electron Beam Treatment
- PET/CT SUV Ratios in an Anthropomorphic Torso Phantom
- Analysis at Effects of Task Skills on Osteoporosis Tests
참고문헌
관련논문
공학 > 기타공학분야 BEST
더보기공학 > 기타공학분야 NEW
- Suggestion of E-waste Management Process for Ghana (EWMP-G) for Eco-friendly E-waste Life Cycle Assessment: A Study on Agbogbloshie, Ghana
- Harvesting Opportunities: Transforming Indonesia's Agribusiness through Smart City Planning in the Digital Economy Era
- 해외 탄소중립 캠퍼스 사례 분석
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!