본문 바로가기

추천 검색어

실시간 인기 검색어

학술논문

방화구획 완화에 따른 PCB공장의 화재위험평가 및 스프링클러 요구살수유량 산정을 통한 기준개선안에 관한 연구

이용수 116

영문명
A Study on a PCB Manufacturing Plant’s Fire Risk Assessment due to the Mitigation of Fire Protection Zone and an Improvement Way through Estimation of Sprinkler Demand Water Flow Rate
발행기관
한국화재소방학회
저자명
오찬욱(Chan-Wook Oh) 오륜석(Ryun-Seok Oh) 최준호(Jun-Ho Choi)
간행물 정보
『한국화재소방학회논문지』Vol.33 No.2, 56~62쪽, 전체 7쪽
주제분류
공학 > 공학일반
파일형태
PDF
발행일자
2019.04.30
4,000

구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

1:1 문의
논문 표지

국문 초록

스프링클러는 방호구역에 설치된 감지기 또는 헤드가 화재를 감지하여 자동으로 화재를 진압하는 소화설비로 화재 초기에 뛰어난 소화효과가 있어 폭넓게 설치되고 있다. 하지만 국토교통부의 「건축물의 피난·방화구조 기준 등에 관한 규칙」에는 공장 또는 창고의 경우 스프링클러설비를 설치하면 방화구획을 3배까지 완화해 줄 수 있도록 그 근거를 제공하고 있다. 이에 본 연구에서는 스프링클러설비 설치로 방화구획을 완화한 실제 Printed Circuit Board (PCB) 공장 1개소를 대상으로 화재위험성을 분석하였고, 컴퓨터 시뮬레이션을 통한 스프링클러설비의 헤드 개방 특성 및스프링클러 설비의 설치기준, 감열성능, 작동범위, 방수량 등을 분석하였다. 또한 이를 통해 화재 시 스프링클러 설비 작동의 문제점을 확인하고, 제도 개선을 위한 요구 살수유량 등 근거를 제시하고자 한다.

영문 초록

A sprinkler is a fire extinguishing equipment installed in a protected area where a detector or head detects a fire and automatically puts out the fire. However, the Ministry of Land, Infrastructure and Transport’s “Regulations on Building Evacuation and Fire Protection Standards, etc.” stipulate that fire compartment area should be reduced to three times by installing sprinkler facilities in the case of factories and warehouses. In this study, fire hazard was analyzed for a real PCB factory which mitigated the fire protection zone by sprinkler installation, and the head opening characteristics of sprinkler facilities through computer simulation, installation standards of sprinkler facilities, thermal performance, operating range, and the amount of water sprayed to identify the problems of operation of sprinkler facilities in case of fire, and to suggest the grounds such as required sprinkling flow rate for system improvement.

목차

1. 서 론
2. 공장 건축물의 스프링클러설비 설치기준 및현장조사를 통한 문제점 분석
3. 화재 시뮬레이션을 이용한 스프링클러설비 설치기준 문제점 분석
4. 요구살수 수량산정을 통한 스프링클러설비 설치기준 개선방안
5. 결 론

키워드

해당간행물 수록 논문

참고문헌

교보eBook 첫 방문을 환영 합니다!

신규가입 혜택 지급이 완료 되었습니다.

바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!

교보e캐시 1,000원
TOP
인용하기
APA

오찬욱(Chan-Wook Oh),오륜석(Ryun-Seok Oh),최준호(Jun-Ho Choi). (2019).방화구획 완화에 따른 PCB공장의 화재위험평가 및 스프링클러 요구살수유량 산정을 통한 기준개선안에 관한 연구. 한국화재소방학회논문지, 33 (2), 56-62

MLA

오찬욱(Chan-Wook Oh),오륜석(Ryun-Seok Oh),최준호(Jun-Ho Choi). "방화구획 완화에 따른 PCB공장의 화재위험평가 및 스프링클러 요구살수유량 산정을 통한 기준개선안에 관한 연구." 한국화재소방학회논문지, 33.2(2019): 56-62

결제완료
e캐시 원 결제 계속 하시겠습니까?
교보 e캐시 간편 결제