학술논문
삼차원 프린팅 기술을 이용한 전산화단층영상 품질 측정용 팬텀 제작 및 비교 연구
이용수 7
- 영문명
- A Study on the Fabrication and Comparison of the Phantom for Computed Tomography Image Quality Measurements Using Three-Dimensions Printing Technology
- 발행기관
- 대한방사선과학회(구 대한방사선기술학회)
- 저자명
- 윤명성(Myeong-Seong Yoon) 홍순민(Soon-Min Hong) 허영철(Yeong-Cheol Heo) 한동균(Dong-Kyoon Han)
- 간행물 정보
- 『방사선기술과학』방사선기술과학 제41권 제6호, 595~602쪽, 전체 8쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2018.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: 1.24 g/cm³) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on exist-ing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.
목차
Ⅰ. 서 론
Ⅱ. 대상 및 방법
Ⅲ. 결 과
Ⅳ. 고 찰
Ⅴ. 결 론
키워드
해당간행물 수록 논문
- 의료기사의 직무스트레스와 만족도의 영향요인 비교
- 방사선사의 임금 적정성 및 직무 만족도
- 삼차원 프린팅 기술을 이용한 전산화단층영상 품질 측정용 팬텀 제작 및 비교 연구
- 방사선기술과학 제41권 제6호 목차
- 방사선기술과학 제41권 제6호 부록
- 인체 흉부 모형 팬텀을 이용한 컴퓨터방사선영상에서 노출지수의 적용 사례 연구
- 진단용엑스선촬영장치의 간접 선량 계산법 개발
- 정상 성인의 좌심실 벽두께와 내강 크기에 대한 심초음파영상과 전산화단층영상의 비교
- 고 에너지 방사선치료 시 GEANT4-DICOM과 TPS간 선량비교 연구
- 정류방식에 따른 장치의 정확도와 출력 파형의 비교
- Telometer를 이용한 슬관절 측부인대 Stress-radiogram의 재현성 비교평가
- 비스무스, 텅스텐 기반 차폐체의 성능 및 유용성 평가
- 전산화단층촬영검사실 방사선사의 방사선피폭 방어행위에 영향을 미치는 요인 분석
- 신체활동 정도에 따른 신체 조성 및 배근력 연구
- 항공기 객실승무원의 우주방사선 노출에 관한 고찰
- 유방암 환자의 Field-in-Field Technique 치료 시 호흡의 움직임에 따른 선량 평가
- 핵의학 융합영상의 표준섭취계수 차이에 관한 연구
- 방사선과 재학생의 수시출입자 방사선 피폭선량에 대한 고찰
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 초음파 조직검사에 사용되는 Biopsy Gun Needle의 재질에 따른 반사율 연구
- 방사선에 대한 지식 및 인식도 연구
- 입원환자 일반촬영 이용량 및 피폭선량: 2018년 입원환자데이터
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!