본문 바로가기

추천 검색어

실시간 인기 검색어

학술논문

슬래그 다짐말뚝의 원심모델링

이용수 3

영문명
Centrifuge Modelling of Slag Compaction Pile
발행기관
강원대학교 산업기술연구소
저자명
유남재(Yoo Nam Jae) 박병수(Park Byung Soo) 정길수(Jeong Gil Soo) 이명욱(Lee Myung Woog)
간행물 정보
『산업기술연구』vol.22, 191~197쪽, 전체 7쪽
주제분류
공학 > 공학일반
파일형태
PDF
발행일자
2002.09.30
4,000

구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

1:1 문의
논문 표지

국문 초록

영문 초록

This paper is experimental and numerical research results of performing centrifuge model tests to investigate the geotechnical engineering behavior of slag compaction pile as a substitute of sand compaction pile. In order to find the geotechnical engineering characteristics of the soft clay and the slag used in centrifuge model experiments, basic soil property tests, consolidation test, permeability tests and triaxial compression tests were performed. For centrifuge model tests, slags with changing relative density were used and their bearing capacity, stress concentrations in between pile and soft clay, settlement characteristics, and failure modes were investigated. As a results of centrifuge model tests, it was found that the bearing capacity of model was increased with increasing density of slag pile and general shear failures were occured. Miniature soil pressure gauges were installed on model pile and soft ground respectively and thus vertical stresses acting on them were measured. Stress concentration ratio was found to be in the range of 2.0~3.0. Bearing capacity obtained from the model test with slag was greater than that from the model test with a sand having the identical layout to each other. Thus it was confirmed the slag was an appropriate substitution of pile for sand.

목차

Abstract
1. 서론
2. 치환율 및 응력분담비
3. 실내실험
4. 결과분석
5. 결론
참고문헌

키워드

해당간행물 수록 논문

참고문헌

교보eBook 첫 방문을 환영 합니다!

신규가입 혜택 지급이 완료 되었습니다.

바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!

교보e캐시 1,000원
TOP
인용하기
APA

유남재(Yoo Nam Jae),박병수(Park Byung Soo),정길수(Jeong Gil Soo),이명욱(Lee Myung Woog). (2002).슬래그 다짐말뚝의 원심모델링. 산업기술연구, 22 , 191-197

MLA

유남재(Yoo Nam Jae),박병수(Park Byung Soo),정길수(Jeong Gil Soo),이명욱(Lee Myung Woog). "슬래그 다짐말뚝의 원심모델링." 산업기술연구, 22.(2002): 191-197

결제완료
e캐시 원 결제 계속 하시겠습니까?
교보 e캐시 간편 결제