Engineering Properties of Flowable Fills with Various Waste Materials

• 영문명: Engineering Properties of Flowable Fills with Various Waste Materials
• 발행기관: 한국방재학회
• 저자명: Lee, Kwan-Ho Lee, Byung-Sik Cho, Kyung-Rae
• 간행물 정보: 『2. 한국방재학회 논문집』8권2호, 105~110쪽, 전체 6쪽
• 주제분류: 공학 > 기타공학
• 파일형태: PDF
• 발행일자: 2008.04.30

영문 초록

Flowable fill is generally a mixture of sand, fly ash, a small amount of cement and water. Sand is the major component of most flowable fill with waste materials. Various materials, including two waste foundry sands(WFS), an anti-corrosive waste foundry sand and natural soil, were used as a fine aggregate in this study. Natural sea sand was used for comparison. The flow behavior, hardening characteristics, and ultimate strength behavior of flowable fill were investigated. The unconfined compression test necessary to sustain walkability as the fresh flowable fill hardens was determined and the strength at 28-days appeared to correlate well with the water-to-cement ratio. The strength parameters, like cohesion and internal friction angle, were determined for the samples prepared by different curing times. The creep test for settlement potential was conducted. The data presented show that by-product foundry sand, an anti-corrosive WFS, and natural soil can be successfully used in controlled low strength materials(CLSM), and it provides similar or better properties to that of CLSM containing natural sea sand.

키워드

CLSM Flowable fill Waste foundry sand Anti-corrosive wfs Unconfined compression strength Creep test