학술논문
전산화단층 모의치료장치의 정도관리 항목 제안
이용수 0
- 영문명
- Proposal of CT Simulator Quality Assurance Items
- 발행기관
- 대한방사선과학회(구 대한방사선기술학회)
- 저자명
- 김연래(Yon-Lae Kim) 윤영우(Young-Woo Yoon) 정재용(Jae-Yong Jung) 이정우(Jeong-Woo Lee) 정진범(Jin-Beom Chung)
- 간행물 정보
- 『방사선기술과학』방사선기술과학 제44권 제4호, 367~373쪽, 전체 7쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2021.08.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 ㎜, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 ㎜ distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 ㎜ tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.
목차
Ⅰ. 서 론
Ⅱ. 대상 및 방법
Ⅲ. 결 과
Ⅳ. 고 찰
Ⅴ. 결 론
REFERENCES
키워드
해당간행물 수록 논문
- HTO 형태 시료 조제 조건에 따른 삼중수소 계측에 미치는 영향 평가
- 방사선검사에 관한 기록 의무화의 필요성
- 몬테카를로 시뮬레이션을 통한 중하전입자의 콘크리트 방사화 비교평가
- 차트 각도를 이용한 해상력 특성 평가
- 3D 프린팅 팬텀의 섬광카메라 적용 평가
- ¹H-NMR Spectroscopy를 이용한 Non-ionic Monomer 조영제의 화학적 구조 분석
- 흉부 전・후방향 검사 시 고관전압 및 산란선 후처리 소프트웨어 적용이 화질과 선량에 미치는 영향
- 전산화단층 모의치료장치의 정도관리 항목 제안
- 초음파로 진단된 자궁근종의 위험인자 평가
- 다발성 경화증 질환의 자기공명 T2 강조영상에서 단면 두께 변화에 따른 잡음 평가
- The Study of Lipid Proton Composition Change in a Rat Model of High Fat Diet Induced Fatty Liver by Magnetic Resonance Spectroscopy Analysis
- 머리뼈 전-후 축 방향검사 시 Tube 방향설정에 따른 표면선량과 영상분석에 관한 연구
- 초음파사와 방사선사의 인구학적 및 직무 특성과 직무 만족도의 비교분석
- 국내 방사성동위원소(RI) 폐기물 핵종분석 다중화채널 구축 성과 분석 및 고찰
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 초음파 조직검사에 사용되는 Biopsy Gun Needle의 재질에 따른 반사율 연구
- 방사선에 대한 지식 및 인식도 연구
- 입원환자 일반촬영 이용량 및 피폭선량: 2018년 입원환자데이터
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!