학술논문
다관능 아크릴레이트계 자외선 경화형 코팅액의 제조 및 이를 이용한 PET 필름 도막의 광학 특성 연구
이용수 17
- 영문명
- Preparation of UV curable coating solution from multi functional acrylates and characterization of optical properties of coated layer on PET film
- 발행기관
- 한국응용과학기술학회 (구.한국유화학회)
- 저자명
- 이 수(Soo Lee) 진석환(Seok Hwan Jin)
- 간행물 정보
- 『한국응용과학기술학회지』한국유화학회지 제26권 제4호, 467~472쪽, 전체 6쪽
- 주제분류
- 공학 > 화학공학
- 파일형태
- 발행일자
- 2008.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Ultraviolet curable coating solution was prepared with poly(ethylene glycol) acrylate oligomer and various mono and multi-functional acrylate monomers. The optical properties of UV cured coating layer on PET film with acrylate coating solution containing metal oxides, such as fumed silica and alumina, were also investigated to reduce light
reflection on films. Poly(ethylene glycol) diacrylate which has 575 of average molecular weight was used as oligomer acrylate, and pentaerythritol triacrylate and dipentaerythritolpenta-/ hexa acrylate were used as multi-functional acrylate monomers. Also, butyl acrylate was used to improve the adhesion as well as to reduce glass transition temperature to give a better flexability. 1-hydroxy cyclohexyl phenyl ketone was used as photoinitiator. We found out the metal oxides in acrylate coating solution showed a homogeneous dispersion from energy dispersive spectroscopy data. Transmittance and light reflection of coated PET film was measured with UV/vis spectrometer and gloss meter, respectively. When 1.00 g of both metal oxides was added into coating solution, the transmittance and the glossiness were reduced from 90% to 30% and from 190 GU to 35 GU, respectively. However, adding up to
1.00 g of the metal oxide into coating solution did not affect on the hardness of coating layer and adhesion between coated layer and PET film. Conclusively, we can control transmittance and light reflection of coated film by adjusting the amounts of metal oxide in coating solution.
목차
1. 서 론
2. 실험
3. 결과 및 고찰
4. 결 론
참고문헌
해당간행물 수록 논문
- 폴리올 농도를 변화시킨 계면활성제 혼합물의 유변학적 거동
- Synthesis of Epoxy Functional Siloxane and its Effect on Thermal Stress
- 연속공정에서 알칼리 및 혼합촉매를 사용한 자트로파유의 바이오디젤화
- Langmuir-Blodgett법으로 제조한 기능성 폴리이미드 초박막의 전기화학적 특성
- 브롬화 알킬화합물 LB막의 전기화학적 특성
- 고분자 첨가제인 난연제로서의 수산화마그네슘계 물질의 합성과 특성
- 쿼터늄-18 헥토라이트를 사용한 Water-in-Oil 에멀젼의 유변학적 거동
- PVC의 저온 열안정성 향상에 관한 연구
- 펄프에 함유된 α-셀룰로오스의 함량이 셀룰로오스의 에스테르화반응에 미치는 영향
- 유기금속 촉매를 사용한 Succinic Acid과 1,4-butanediol의 에스테르화반응에 관한 연구
- 다관능 아크릴레이트계 자외선 경화형 코팅액의 제조 및 이를 이용한 PET 필름 도막의 광학 특성 연구
- 무기성 순환자원의 수소 활성화 및 이산화탄소 분해
- 어류비늘에서 추출한 콜라겐펩타이드의 제조 및 유효성 분석
- Copper Alloy Metal Fiber를 이용한 Heat pipe 표면의 스케일 제거에 관한 연구
- TiO2 입자 제조에 있어 용매 종류와 소성온도 영향
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!