학술논문
Virtual Digital Test Pattern Method를 이용한 CR 시스템의 영상처리 특성 분석
이용수 22
- 영문명
- Analysis of Image Processing Characteristics in Computed Radiography System by Virtual Digital Test Pattern Method
- 발행기관
- 대한방사선과학회(구 대한방사선기술학회)
- 저자명
- 최인석(In-Seok Choi) 김정민(Jung-Min Kim) 오혜경(Hye-Kyong Oh) 김유현(You-Hyun Kim) 이기성(Ki-Sung Lee) 정회원(Hoi-Woun Jeong) 최석윤(Seok-Yoon Choi)
- 간행물 정보
- 『방사선기술과학』방사선기술과학 제33권 제2호, 97~107쪽, 전체 11쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2010.06.30
4,120원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
연구 목적은 virtual digital test pattern method을 이용하여 REGIUS 150 CR 시스템의 각 LUT별 프로세싱 커브를 도출하고, Dry Imager의 특성을 파악하여 CR의 영상처리 방법을 분석하는 것이다. 실험은 먼저, CR의 화상데이터에 맞게 virtual digital test pattern 파일을 만들고, 인위적으로 입력하여 virtual digital test pattern step의 변화를 통해 각 LUT(THX, ST, STM, LUM, BONE, LIN)별 프로세싱 커브를 구한다. 그리고 하드카피 이미지를 통해 Dry Imager의 프로세싱 커브도 도출한다. 마지막으로, CR 본체의 영상처리 파라미터들을 변화시켜 각각의 특성을 알아낸다. 실험 결과를 살펴보면, 입.출력 값을 통해 CR 시스템의 입력 다이나믹 레인지의 LUT별 프로세싱 커브를 구하였다. 프로세싱 커브는 모두 곡선으로 이어져 있었으며(LIN mode 제외), 각 커브마다 조금씩 차이를 보였다. 또한 Dry Imager의 프로세싱 커브는 중간부분에만 선형성이 나타났다. 그리고 프로세싱 파라미터의 G value는 기울기와, S value는 감도의 shift량과 관련된다는 것을 알 수 있었고, 선량에 따라 S value가 비례하여 변화한다는 것 또한 유추해 낼 수 있었다. 결론적으로 CR 시스템은 각 회사별로 내부 처리가 다르고, 구조 또한 복잡하기 때문에 내부 영상처리의 파악이 어렵다. 하지만 본 연구에서 사용한 virtual digital test pattern method는 CR 시스템의 내부처리 구조와 영상 파라미터의 변화에 따른 특성을 추정할 수 있으므로, 이 방법을 통해 타 장비의 CR 시스템과 Dry Imager의 전체적인 영상처리 특성을 비교, 분석 가능할 것이다.
영문 초록
The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results,we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.
목차
Ⅰ. 서 론
Ⅱ. 실험 재료
Ⅲ. 실험 방법
Ⅳ. 실험 결과
Ⅴ. 고 찰
Ⅵ. 결 론
키워드
해당간행물 수록 논문
- 친환경 소재의 의료 방사선 차폐 시트 개발
- 저 선량 베타선의 조사에 의한 식물의 생장에 미치는 영향
- 선형가속기의 동적쐐기(EDW) 작동에 대한 품질보증
- 진폐요양기관의 흉부 디지털촬영과 아날로그촬영의 정도관리 비교
- 응급환자에서 후방십자인대 손상 및 슬대퇴 관절을 관찰하기 위한 보조기구 제작 및 유용성 평가
- MDCT(다배열검출기 전산화단층촬영장치)에서 Z-축의 빔 두께에 따른 산란선의 평가
- Virtual Digital Test Pattern Method를 이용한 CR 시스템의 영상처리 특성 분석
- 고용량 131I 투여환자 퇴원이후 환자 간병인과 환자 가옥의 피폭선량 측정
- 국내 치과방사선의 현황 및 이용 실태
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 초음파 조직검사에 사용되는 Biopsy Gun Needle의 재질에 따른 반사율 연구
- 방사선에 대한 지식 및 인식도 연구
- 입원환자 일반촬영 이용량 및 피폭선량: 2018년 입원환자데이터
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!