베어링용 Silver 박막의 제작과 고체윤활 특성

• 영문명: Preparation of Silver Thin Film for Bearing Applications and Their Solid Lubricating
• 발행기관: 한국해양대학교 해사산업연구소
• 저자명: 이경황(K.H.Lee) 배일용(I.L.Bae) 류한진(H.J.Ryu) 이찬식(C.S.Lee) 이명훈(M.H.Lee)
• 간행물 정보: 『해사산업연구소논문집』제10집, 83~90쪽, 전체 8쪽
• 주제분류: 공학 > 해양공학
• 파일형태: PDF
• 발행일자: 2000.12.01

영문 초록

As many industrial fields are rapidly advancing, material requirements for propulsion engines are becoming ever more sever. Particularly in machine and shipping industries, high durable engines are much desired. In these sectors, the development of high performance materials is a very important subject in order to enhance the properties of bearings whose role is to transfer energy harmoniously by reducing the problem of friction and wear down, etc. between the interacting solid surfaces in relative motion under high loads in comply with mechanical operating mechanism of engines. Silver is known to have such characteristics as low shear strength, good transfer-film forming tendency, and good corrosion resistance. Silver thin films have been prepared by ion plating of physical vapour deposition (PVD) using both argon gas pressure and bias voltage of processing condition. After the silver films were prepared, the properties in them were examined by gas pressure and bias voltage of substrate. Their morphology and crystal orientation were investigated by scanning electron microscopy(SEM) and X-ray diffractor. The properties of film were, also, studied to relate with morphology, X-ray diffraction pattern, and friction coefficient at vacuum ambient. The friction coefficient was stabilized remarkably on deposited films with increasing argon pressure for deposition. Also, the effect of increasing of the bias voltage for deposition resulted in lower friction coefficient and stability in 1.7x10-4torr. On the contrary, behavior of friction coefficient was stabilized on deposited films with decreasing the bias voltage in 1.7x10-5torr for deposition.

목차

ABSTRACT

1. 서론

2. 실험 방법

3. 실험결과 및 고찰

4. 결론

참고문헌