학술논문
이동식 목욕차량의 조립시스템에 대한 시뮬레이션 분석
이용수 11
- 영문명
- A Simulation Analysis on the Assembly System of Mobile Bath Vehicles
- 발행기관
- 한국산업경영시스템학회
- 저자명
- 정호연(Hoyeon Chung)
- 간행물 정보
- 『산업경영시스템학회지』제44권 제2호, 93~101쪽, 전체 9쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2021.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of this study is to analyze the adequacy of production capacity of the assembly process system of mobile bath vehicle’s top box panel and process design through a simulation analysis. Towards this end, the layout of the facility designed with pre-verification job using a simulation modeling and an experiment, and facility, logistics process, and personnel input method were made into a simulation model, and the design system’s adequacy was evaluated through an experiment. To produce 120 mobile bath vehicles annually, it was analyzed that 14 general workers and seven skilled workers were adequate through the experiment. It was also identified that three painting process lines carried out through outsourcing were adequate. Production lead time was 201.7 hours on average and it was 230 hours maximum. To meet customer delivery service level of 95% within the deadline when establishing a customer order and vehicle delivery plan, it was analyzed that more than 215 hours of lead time is needed minimum. If the process cycle time is reduced to 85% upon system stabilization and skillfulness improvement, it was analyzed that annual output of 147 vehicles can be achieved without additional production line expansion.
목차
1. 서 론
2. 모델화 범위 및 방법
3. 모델화 대상 및 시뮬레이션 조건
4. 실험 결과 및 분석
5. 결 론
해당간행물 수록 논문
- 분해옵션 포함 서비스부품 로트사이징 휴리스틱
- 로지스틱 회귀분석을 이용한 조직 근로환경에서의 심리사회적 위험관리 방안의 효과 검증
- 기화 설비의 토출 온도 예측을 위한 인공지능 모델 개발
- 다기간 자료포락분석을 이용한 전기차 충전소 효율성 변화 분석
- 자원 재배치를 위한 차량 경로계획의 다목적 최적화
- 모바일 디바이스의 원인불명고장에 관한 비용 추정
- 조직의 안전보건경영 활동이 안전보건 성과에 미치는 영향 연구
- 시뮬레이션 방식을 이용한 리드 타임 개선 사례 연구
- 국제 표준 기반하에서 품질경영과 제품안전경영 시스템의 통합 구축 방안
- 이동식 목욕차량의 조립시스템에 대한 시뮬레이션 분석
- 텍스트 마이닝을 활용한 사용자 핵심 요구사항 분석 방법론
- 중소기업 스마트 공장 확장성 사례연구
- 이변수 다항식 문제에 대한 새로운 메타 휴리스틱 개발
- 대표적인 의사결정나무 알고리즘의 해석력 비교
- PLC 디지털 제어 신호를 통한 LSTM기반의 이산 생산 공정의 실시간 고장 상태 감지
참고문헌
관련논문
공학 > 산업공학분야 NEW
- 고분자 표면의 흡습성 및 경도 제어 연구
- 황동층의 형성과 선택적 아연 에칭을 통한 구리 필라 상 다공성 구리층의 제조와 구리-구리 플립칩 접합
- 다양한 기계적 하중조건에서 초기 형상이 솔더볼의 비탄성 변형에 미치는 영향에 관한 수치적 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!