학술논문
개선된 가변구조 제어기를 이용한 유도전동기 위치제어
이용수 2
- 영문명
- Position Control of Induction Motor with a Modified VSC
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 황승호(Sueng-Ho Hwang)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제15권 1호, 1~7쪽, 전체 7쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2010.03.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
It has been known that variable structure control(VSC) has theoretically powerful control technique of providing fast response, no overshoot, and very robust control with respect to system parameter variations and disturbances. However, the technique has not become more widely extended in the industrial circles because chattering phenomenon which may excite high-frequency unmodelled plant dynamics and damage to system components exists. In this paper, a modified variable structure control(MVSC) is developed to alleviate these problems, full-order flux observer os to estimate rotor flux without influences for the parameter variations of the motor. and which are applied to the position control of induction motor. While the conventional VSC makes the structure of the system change with high-frequency switching on the center of the one switching surface, in the MVSC two switching surfaces are used to establish a sliding sector. The structure of the system with low-frequency swiching. Therefore, the proposed algorithm has the properties of reducing chattering, reducing the benefits achieved in the conventional VSC, and working even under the influences of parameter variations. Experimental results show the effectiveness of the control strategy proposed here for the position control of induction motor.
목차
Ⅰ. 서 론
Ⅱ. 기존의 가변구조 제어
Ⅲ. 개선된 가변구조 제어
Ⅳ. 시스템의 구성
Ⅴ. 실험 결과 및 고찰
해당간행물 수록 논문
- 내장형 Inverted-F형 DMB 안테나에 관한 연구
- 서브머어지드 아크 용접시 Ni이 熔接部에 미치는 機械的性質에 대한 고찰
- 개선된 가변구조 제어기를 이용한 유도전동기 위치제어
- 버어 발생을 최소화하기 위한 미세 드릴가공의 절삭 조건
- 초전도 전류리드의 제작에 관한 연구
- 휘도 조정이 가능한 전자식 네온변압기의 개발에 관한 연구
- Al(6061)에 대한 MIG용접 시 결함발생 원인과 분석에 대한 고찰
- 섬유강화 복합재료의 强度에 습기가 미치는 影響
- 점화플러그의 전극 간극과 기관회전수 변화에 따른 배기가스 및 점화2차파형 분석
- Flyback방식을 적용한 100W급 고성능 LED 드라이브에 관한 연구
- 내점법에 의한 선로 전력 조류 제약을 고려한 경제급전에 관한 연구
- GMAW용접에서 와이어의 돌출길이와 전류 및 전압이 알루미늄 재료에 미치는 영향
- 입체각 내에서 경사각에 대한 과냉 현상에 관한 실험적 연구
- 점용접에서 생산성 향상 및 불량률 감소를 위한 연구
- Fe-Al-(x)계 합금의 제진특성에 미치는 첨가원소의 영향
- 도금조건에 따른 무전해 니켈 도금층에 대한 연구
- 중절삭 밀링가공에서 부등각 엔드밀의 절삭특성 분석
- 루비와 사파이어의 다양한 처리 및 동향에 관한 연구
- 농촌자동화를 위한 자동제어 장치 개발
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!